300zx driver side turbo removal

Remove the entire assemblies. Plug the turbo outlets with rags to keep debris out of them. The wastegate solenoid connectors might be clipped onto the hard pipe part of the assembly. On the driver side, there is a bracket coming down from the plenum toward a bracket on another piece of .  · You will have to remove the turbo compressor outlet elbow to get the heat shield out, but wait until all of the bolts are out of the heat shield since you will need to hold the heat shield all the way up with your knuckle while using your finger and and flat head .  · Remove the center console by removing 3 phillips screws (red circles) and removing the shift knob by unscrewing the shift knob. If you have never removed the shift knob before, this part will be really tough as Nissan put lock-tite on the threads. 3. Remove the upper dust boot (red circle). 4.

Bend upthe locking plate tabs. Remove the turbo (4 x 13mm), use a wrench on theback two nuts outside front (). Use a socket on an extensionfrom below to get the last one. Removethe intake outlet (3 x 10mm 1 x 10mm for water line bracket). Removethe heat shield bracket from the compressor side of the turbo (2 x 10mm)(red dots in ). Air Regulator, ZX, Non-turbo All, Non-turbo Auto - rebuilt. Rebuilt Air Regulator fits Nissan ZX Non-turbo, and Nissan ZX Non-turbo with Automatic transmissions Learn More. Add to Cart. $ Air Regulator, ZX, Non-turbo Manual, Turbo - rebuilt. Im trying to get the driver side cv shaft out of my 88 zx non turbo. First i unbolted the 6 nuts and seperated it from the wheel but i cant get it to drop down all the way. It hits the shock mount. I tried popping it out of the rear end and dropping it that way but it didnt work. Any ideas on what im doing wrong. Thanks.

1 de fev. de It was a given that a new liter V-6 engine would replace the liter in-line six, which was both long of tooth and long of length. The. 13 de ago. de Remove and discard the turbocharger oil return tube assembly gasket. 9. Remove the turbocharger bracket bolt. NOTE: Use a 3/8 inch Jiffy-. 24 de out. de The Nissan ZX is a twin-turbo, four-wheel-steer masterpiece of Launched in the UK in , the rear-wheel-drive ZX conformed to.